# Troubleshooting Ethernet Adapter Not Appearing in Windows Network Settings
Canonical Interactive Tool: https://www.whyitsbroken.com/fix/troubleshooting-ethernet-adapter-not-appearing-in-windows-network-settings
Subsystem: Motherboard Integrated Network Interface Controller (NIC) | Difficulty: Moderate DIY | Time: 15-45 min | DIY Cost: $0.00-$45.00 (vs Pro $150.00-$340.00)
Empirical Verified Fixes: 1 | Evolution Version: v1

## Direct Answer Summary
The most probable cause is a corrupted or missing driver stack, often triggered by a failed Windows update. Confirm this by checking Device Manager for 'Unknown Devices' or Code 3/10 errors. A driver reinstall is free, while hardware replacement via a PCIe NIC costs roughly $20-$45; professional repair services typically range from $150 to $340.

## Ranked Root Causes & Telemetry Signatures
### 1. Driver Corruption or OS Conflict (Baseline Probability: 45%)
- **Telemetry Signature:** Software: Code 3 or Code 10 in Device Manager
- **Why It Happens:** Windows registry or driver files become corrupted during updates, preventing the OS from initializing the NIC hardware.
- **60-Second Verification Test:** Check Device Manager for 'Unknown Device' or 'Network Controller' with a yellow bang.
- **Resolution Steps:**
  1. Download latest NIC driver from manufacturer website on another PC.
  2. Uninstall existing driver in Device Manager.
  3. Reboot and install the downloaded driver package.
  4. Verify connection in Network and Sharing Center.

### 2. BIOS/UEFI Disabled NIC (Baseline Probability: 25%)
- **Telemetry Signature:** Hardware: NIC not detected by OS, no link lights
- **Why It Happens:** BIOS settings may have reset due to a CMOS battery failure or accidental user configuration change.
- **60-Second Verification Test:** Enter BIOS (F2/Del) and verify 'Onboard LAN' or 'Integrated NIC' is set to Enabled.
- **Resolution Steps:**
  1. Restart PC and enter BIOS setup.
  2. Navigate to Advanced or Integrated Peripherals menu.
  3. Locate Onboard LAN and toggle to Enabled.
  4. Save and exit.

### 3. Physical NIC Hardware Failure (Baseline Probability: 15%)
- **Telemetry Signature:** Hardware: NIC missing from BIOS and OS; no link lights
- **Why It Happens:** Surges or component aging can cause the integrated NIC chip on the motherboard to fail permanently.
- **60-Second Verification Test:** If NIC is missing from BIOS, it is likely a dead controller.
- **Resolution Steps:**
  1. Power off and unplug PC.
  2. Install a dedicated PCIe network card.
  3. Boot PC and install drivers for the new card.
  4. Disable onboard LAN in BIOS.

### 4. Cable or Port Physical Damage (Baseline Probability: 15%)
- **Telemetry Signature:** Hardware: Link lights off or intermittent
- **Why It Happens:** Bent pins in the RJ45 port or a broken wire inside the cable prevent the handshake required for detection.
- **60-Second Verification Test:** Swap the Ethernet cable with a known-working one and test a different port on the router.
- **Resolution Steps:**
  1. Inspect RJ45 port for bent pins.
  2. Replace Ethernet cable.
  3. Test connection on different router port.
  4. Verify link lights on the rear panel.

## Frequently Asked Questions
**Q: Why does my Ethernet adapter disappear after sleep mode?**
This is often a power management setting. Go to Device Manager, right-click the NIC, select Properties > Power Management, and uncheck 'Allow the computer to turn off this device to save power'.

**Q: Can I use a USB-to-Ethernet adapter?**
Yes, this is an excellent workaround if your integrated NIC has failed and you do not want to open the PC case.

**Q: What does Code 3 mean in Device Manager?**
Code 3 indicates that the driver for this device might be corrupted or the device is not properly installed. Reinstalling the driver usually resolves this.

**Q: Is my motherboard broken if the NIC is gone?**
Not necessarily. It could be a BIOS setting or a driver issue. Only if the NIC is missing from the BIOS menu itself is it likely a hardware failure.

## External Technical References
- [Ethernet Wired adapter missing - Microsoft Q&A](https://learn.microsoft.com/en-us/answers/questions/5606403/ethernet-wired-adapter-missing)
- [Fix Ethernet connection problems in Windows](https://support.microsoft.com/en-us/windows/experience/connectivity-networking/fix-ethernet-connection-problems-in-windows)
- [Wired Networking Solutions: Ethernet and Wired LAN Connection Issues | Dell US](https://dell.com/support/contents/en-us/article/product-support/self-support-knowledgebase/networking-wifi-and-bluetooth/wired-networking)
- [PowerEdge: How to troubleshoot Network Interface Card (NIC) connectivity](https://dell.com/support/kbdoc/en-gh/000227983/poweredge-how-to-troubleshoot-network-interface-card-nic-connectivity)
- [Test 1: Making Sure the Ethernet Adapter is Recognized](https://pcweenie.com/content/test-1-making-sure-ethernet-adapter-recognized)
