# Fix Intel Wi-Fi 6E AX210 Code 10 Device Manager Error
Canonical Interactive Tool: https://www.whyitsbroken.com/fix/fix-intel-wi-fi-6e-ax210-code-10-device-manager-error
Error Code: `Code 10`
Subsystem: Intel Wi-Fi 6E AX210 PCIe/M.2 Wireless Adapter | Difficulty: Easy DIY | Time: 15-45 min | DIY Cost: $0.00-$45.00 (vs Pro $150.00-$340.00)
Empirical Verified Fixes: 1 | Evolution Version: v1

## Direct Answer Summary
The #1 cause is a driver initialization failure due to power state corruption, often triggered by multi-OS switching or fast-boot cycles. Confirm by performing a full cold-boot cycle (power off, hold power button 30s). DIY cost is $0 via software resets, or ~$30 for a replacement card if hardware failure is confirmed.

## Ranked Root Causes & Telemetry Signatures
### 1. Power State/Fast Startup Conflict (Baseline Probability: 45%)
- **Telemetry Signature:** Normal: 3.3V VCC | Fault: VCC present but PCIe bus handshake timeout
- **Why It Happens:** Windows Fast Startup saves the driver state to disk, preventing a clean hardware reset upon reboot, causing the AX210 to hang in an inconsistent power state.
- **60-Second Verification Test:** Disable 'Fast Startup' in Power Options and perform a full shutdown/cold boot.
- **Resolution Steps:**
  1. Go to Control Panel > Power Options > Choose what power buttons do.
  2. Click 'Change settings that are currently unavailable'.
  3. Uncheck 'Turn on fast startup'.
  4. Shutdown, wait 30 seconds, and power on.

### 2. Driver/Registry Corruption (Baseline Probability: 25%)
- **Telemetry Signature:** Normal: Driver v23.x | Fault: Registry Upper/LowerFilters present
- **Why It Happens:** Corrupted registry filter keys (UpperFilters/LowerFilters) block the driver from binding to the device stack.
- **60-Second Verification Test:** Check Device Manager for 'Code 10' and attempt a clean driver uninstall/reinstall.
- **Resolution Steps:**
  1. Uninstall device in Device Manager, check 'Delete driver software'.
  2. Download latest OEM driver from motherboard support page.
  3. Install driver and reboot.
  4. If failed, use Regedit to remove Upper/LowerFilters in {4d36e972-e325-11ce-bfc1-08002be10318}.

### 3. Physical M.2 Connection/Static (Baseline Probability: 20%)
- **Telemetry Signature:** Normal: Stable 3.3V | Fault: Intermittent VCC or PCIe data line noise
- **Why It Happens:** Oxidation on M.2 pins or loose antenna connections can cause intermittent signal loss, leading to initialization timeouts.
- **60-Second Verification Test:** Reseat the card and check antenna leads for secure 'click' connection.
- **Resolution Steps:**
  1. Turn off power and unplug PSU.
  2. Remove M.2 card, clean pins with isopropyl alcohol.
  3. Reseat card and verify antenna connections.
  4. Reassemble and test.

### 4. Hardware Failure (AX210 Module) (Baseline Probability: 10%)
- **Telemetry Signature:** Normal: Device detected | Fault: Device not found in BIOS/PCIe scan
- **Why It Happens:** Internal controller failure or firmware bricking prevents the device from responding to PCIe bus enumeration.
- **60-Second Verification Test:** Verify if the device appears in BIOS/UEFI system information. If absent, the hardware is likely dead.
- **Resolution Steps:**
  1. Confirm device is missing in BIOS.
  2. Purchase compatible Intel AX210 M.2 module.
  3. Replace module.
  4. Install latest drivers.

## Frequently Asked Questions
**Q: Does Code 10 always mean the card is broken?**
No, Code 10 is a generic 'Device cannot start' error. It is most frequently caused by software or driver conflicts rather than physical hardware failure.

**Q: Can I use the Intel generic driver instead of the motherboard driver?**
While possible, OEM-specific drivers are optimized for the motherboard's power management and PCIe implementation, making them more stable for integrated Wi-Fi.

**Q: Why does the error happen when switching OS?**
Fast Startup saves the hardware state to the disk. When switching to another OS, the hardware may remain in a locked or inconsistent state from the previous OS session.

**Q: Is it safe to delete UpperFilters and LowerFilters?**
Yes, but only for the specific class GUID related to the network adapter. Always create a system restore point before modifying the registry.

## External Technical References
- [Intel AX210 doesn't work after switching between Operating Systems.](https://community.intel.com/t5/Wireless/Intel-AX210-doesn-t-work-after-switching-between-Operating/m-p/1311384)
- [Re: Intel AX210 doesn't work after switching between Operating Systems.](https://community.intel.com/t5/forums/forumtopicprintpage/board-id/wireless/message-id/37508/print-single-message/false/page/1)
- [Re:I need immense help with my: Intel Wi-Fi 6E AX210 160MHz (code 10 or 43)](https://community.intel.com/t5/Ethernet-Products/I-need-immense-help-with-my-Intel-Wi-Fi-6E-AX210-160MHz-code-10/m-p/1756635)
- [Wi-Fi Intel wi-fi 6e ax210 160mhz Code 10 - Wifi and bluetooth interference. - Microsoft Q&A](https://learn.microsoft.com/en-us/answers/questions/4130066/wi-fi-intel-wi-fi-6e-ax210-160mhz-code-10-wifi-and)
- [Re:Intel AX210 doesn't work after switching between Operating Systems.](https://community.intel.com/t5/Wireless/Intel-AX210-doesn-t-work-after-switching-between-Operating/m-p/1312450/highlight/true)
