TELEMETRY // Normal: Firm/White | Fault: Soft/Black/Mushy
Why It Happens: Excessive moisture creates an anaerobic environment where Pythium or Phytophthora fungi thrive, causing root tissue necrosis.
Fast Verification Test: Gently lift the plant from the pot and inspect the root texture; if roots are mushy and dark, rot is present.
Tools Needed: Sterilized shears • Fresh potting mix • Clean pot with drainage
- Remove plant from pot and gently wash away old soil.
- Use sterilized shears to trim all mushy, dark, or decaying roots.
- Repot in fresh, well-draining soil in a clean container.
- Adjust watering frequency to allow soil to dry between cycles.
⚠️ Safety Boundary: Always sterilize tools with 70% isopropyl alcohol between cuts to prevent cross-contamination.
TELEMETRY // Normal: Moist soil | Fault: < 10% moisture content
Why It Happens: Lack of water causes root desiccation and cell death, leading to wilting that mimics rot symptoms.
Fast Verification Test: Check soil moisture at 2-inch depth; if bone dry, perform a deep soak.
Tools Needed: Watering can
- Submerge pot in a basin of water for 30 minutes.
- Allow excess water to drain completely.
- Monitor soil moisture levels weekly.
⚠️ Safety Boundary: Do not overcompensate by flooding; ensure drainage holes are clear.
TELEMETRY // Normal: Free flow | Fault: Standing water in saucer
Why It Happens: Lack of drainage holes or a heavy soil medium traps water, preventing oxygen exchange at the root zone.
Fast Verification Test: Check if the pot has drainage holes; if not, water is pooling at the bottom.
Tools Needed: Drill (for plastic pots) • New pot with holes
- Repot into a container with adequate drainage holes.
- Use a well-draining potting mix with perlite or pumice.
- Ensure the saucer is emptied 15 minutes after watering.
⚠️ Safety Boundary: Wear eye protection if drilling drainage holes into ceramic or plastic pots.
TELEMETRY // Normal: pH 6.0-7.0 | Fault: pH < 5.0 or > 8.0
Why It Happens: Improper pH levels or excessive fertilizer salts prevent nutrient uptake, causing yellowing and leaf drop.
Fast Verification Test: Test soil pH using a standard home soil test kit.
Tools Needed: Soil pH test kit • Distilled water
- Flush the soil with distilled water to remove excess salts.
- Apply balanced fertilizer only during the active growing season.
- Adjust soil pH using lime or sulfur as indicated by test.
⚠️ Safety Boundary: Do not fertilize a plant that is currently suffering from active root rot.